FireBird Series Frame Grabber

Category：Active Silicon
Visits： 27 Clicked
Date：2023-11-17 11:30:54
Download：

Details

The new FireBird series brings the full power of CoaXPress to high speed imaging applications in a range of markets such as machine vision, defense, medical and life sciences. Available for a variety of operating systems and utilizing the next generation (Gen 2) PCI Express interface.

CoaXPress Frame Grabber

Four CoaXPress links, each at 6.25 Gbps

Next generation FireBird family

8 lane gen 2 PCI Express interface

Supports the new v1.0 CoaXPress interface.

Very high performance with 25 Gigabits per second input rate.

Very fast PCI Express 8 lane gen 2 interface.

Comprehensive I/O.

Supports PoCXP (Power over CoaXPress).

CoaXPress gives high speed data, power, and camera control all over one long cable.

Standard half-length PCI form factor.

Supported by the proven Phoenix software SDK.

CoaXPress Interface:	4 BNC connectors provide four links each operating up to 6.25 Gbps, and each supporting Power over CoaXPress (PoCXP). These can support up to four individual cameras, or combinations of cameras requiring multiple CoaXPress links – for instance one camera requiring two links, and two additional cameras each using one link. LEDs built into each BNC show the link status according to the CoaXPress specification.
Buffer Memory:	512 Mbytes of DDR3 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus.
PCI Express:	8 lane gen 2 interface to support up to 40 Gbps transfer from FireBird to the PC.
I/O:	The following I/O lines are provided for triggers, shaft encoders, exposure control and general I/O: •4 opto-isolated inputs. •4 opto-isolated outputs. •4 TTL inputs, 5V tolerant. •4 TTL outputs, 5V logic. •4 RS-422 inputs. •4 RS-422 outputs. All these I/O signals are provided on a 50 way header on the FireBird board.
Power Input:	An auxiliary connector is provided to link directly to the PC power supply.